【100元】OpenFOAM+preCICE安装

[问题详述]:OpenFOAM+preCICE安装
[预期成果]:按照https://github.com/precice/openf ... over-a-heated-plate的安装步骤,完成OpenFOAM+preCICE软件的安装
[项目金额]:100元
[预期完成时间]:尽快
[相关文档]:无
[其他补充]:安装步骤已有,如下网址:
https://github.com/precice/openf ... over-a-heated-plate

安装大致流程:

Tutorial for a coupled simulation with OpenFOAM
This tutorial describes how to run a conjugate heat transfer with OpenFOAM. The files for this tutorial can be found in the tutorials directory and are prepared for OpenFOAM 5.
Case setup
This scenario consists of one fluid and one solid participant. A fluid enters in a channel with temperature 300K, where it comes in contact with a solid plate, which is heated from below at a constant temperature of 310K.
This test case is two-dimensional, but because OpenFOAM is written for three-dimensional simulations, we run a quasi-2D simulation with three dimensional meshes with only one cell in y-direction.
A serial-implicit coupling is used, where the fluid participant reads heat fluxes and the solid participant reads temperatures. Both participants can be executed either in serial or in parallel.
Used solvers
Fluid flow: OpenFOAM, solver buoyantPimpleFoam. This is an open-source solver for transient, buoyant, turbulent flow of compressible fluids for ventilation and heat transfer.
Heat transfer on the solid: OpenFOAM, solver laplacianFoam. This is an open-source solver that can solve the thermal diffusion in a solid.
The tutorial is prepared for OpenFOAM 5.0 from openfoam.org. OpenFOAM v1706 from openfoam.com is also compatible.
OpenFOAM website (variant from The OpenFOAM Foundation)
OpenFOAM website (variant from the ESI Group)
Step 1: Install required software
For simulating the described case, the following software is necessary:
After installing both OpenFOAM and preCICE, you need to build the OpenFOAM adapter.
Step 2: Setup solvers
Both cases are already configured. If you want to learn more about the configuration, you may read the following pages:
Both participants require the precice-config.xml file. Since we provide both a serial and a parallel version of the tutorial, this is a link that points either to precice-config_serial.xml or to precice-config_parallel.xml, depending on which script is used to run the case. For more information about this file, see the preCICE wiki.
Step 3: SimulateStep 4: Visualize
After the first results are written (a new time directory will be created), you may visualize the results.



    您需要登录后才可以回帖 登录 | 立即注册

    本版积分规则

    9

    主题

    23

    帖子

    609

    积分

    高级会员

    Rank: 4

    积分
    609
    发表于 2018-4-14 00:17:52 来自手机 | 只看该作者
    沙发
    以什么形式提交成果?我可否将安装过程发到公众号?

    1

    主题

    6

    帖子

    25

    积分

    新手上路

    Rank: 1

    积分
    25
    发表于 2019-3-25 10:46:46 | 只看该作者
    地板

    请问您的公众号的地址是哪个

    9

    主题

    23

    帖子

    609

    积分

    高级会员

    Rank: 4

    积分
    609
    发表于 2019-4-4 06:37:44 | 只看该作者
    5#

    9

    主题

    23

    帖子

    609

    积分

    高级会员

    Rank: 4

    积分
    609
    发表于 2019-4-4 06:39:29 | 只看该作者
    6#

    我后来在自己的虚拟机上编译,居然没成功……我给你编译的那份能用吗?

    Powered by Discuz! X3.4??? 2001-2013 Comsenz Inc.