OpenFOAM + preCICE安装

苏雨 ?于?2019-3-26 11:14:37 回帖奖励 |阅读模式
8 1310
[问题详述]:OpenFOAM+preCICE安装
[预期成果]:按照https://github.com/precice/openf ... over-a-heated-plate的安装步骤,完成OpenFOAM+preCICE软件的安装
[项目金额]:100元
[预期完成时间]:尽快
[相关文档]:无
[其他补充]:需要在centos上安装,安装步骤已有,可参考如下网址:
https://github.com/precice/openf ... over-a-heated-plate

Tutorial for a coupled simulation with OpenFOAM
This tutorial describes how to run a conjugate heat transfer with OpenFOAM. The files for this tutorial can be found in the tutorials directory and are prepared for OpenFOAM 5.
Case setup
This scenario consists of one fluid and one solid participant. A fluid enters in a channel with temperature 300K, where it comes in contact with a solid plate, which is heated from below at a constant temperature of 310K.
This test case is two-dimensional, but because OpenFOAM is written for three-dimensional simulations, we run a quasi-2D simulation with three dimensional meshes with only one cell in y-direction.
A serial-implicit coupling is used, where the fluid participant reads heat fluxes and the solid participant reads temperatures. Both participants can be executed either in serial or in parallel.
Used solvers
Fluid flow: OpenFOAM, solver buoyantPimpleFoam. This is an open-source solver for transient, buoyant, turbulent flow of compressible fluids for ventilation and heat transfer.
Heat transfer on the solid: OpenFOAM, solver laplacianFoam. This is an open-source solver that can solve the thermal diffusion in a solid.
The tutorial is prepared for OpenFOAM 5.0 from openfoam.org. OpenFOAM v1706 from openfoam.com is also compatible.
OpenFOAM website (variant from The OpenFOAM Foundation)
OpenFOAM website (variant from the ESI Group)
Step 1: Install required software
For simulating the described case, the following software is necessary:
After installing both OpenFOAM and preCICE, you need to build the OpenFOAM adapter.
Step 2: Setup solvers
Both cases are already configured. If you want to learn more about the configuration, you may read the following pages:
Both participants require the precice-config.xml file. Since we provide both a serial and a parallel version of the tutorial, this is a link that points either to precice-config_serial.xml or to precice-config_parallel.xml, depending on which script is used to run the case. For more information about this file, see the preCICE wiki.
Step 3: SimulateStep 4: Visualize
After the first results are written (a new time directory will be created), you may visualize the results.




    您需要登录后才可以回帖 登录 | 立即注册

    本版积分规则

    9

    主题

    23

    帖子

    609

    积分

    高级会员

    Rank: 4

    积分
    609
    发表于 2019-4-4 06:36:29 | 只看该作者
    沙发
    我记得给你装过一次。遇到什么新问题了吗?

    1

    主题

    6

    帖子

    25

    积分

    新手上路

    Rank: 1

    积分
    25
    ?楼主| 发表于 2019-4-4 16:42:38 | 只看该作者
    板凳

    您没有给我装过,我只是发布了和您之前帮的人一样的任务。因为没有您的联系方式。能请您帮我装一下吗,在虚拟机上。

    1

    主题

    6

    帖子

    25

    积分

    新手上路

    Rank: 1

    积分
    25
    ?楼主| 发表于 2019-4-4 16:44:21 | 只看该作者
    地板

    哦对了 还有是需要安装在centos上

    9

    主题

    23

    帖子

    609

    积分

    高级会员

    Rank: 4

    积分
    609
    发表于 2019-4-10 03:17:21 | 只看该作者
    5#

    这样子啊! 怕是有难度。现在有什么新进展吗?

    1

    主题

    6

    帖子

    25

    积分

    新手上路

    Rank: 1

    积分
    25
    ?楼主| 发表于 2019-4-11 11:21:55 | 只看该作者
    6#

    目前还没有进展,暂时放置在那边没有弄了

    9

    主题

    23

    帖子

    609

    积分

    高级会员

    Rank: 4

    积分
    609
    发表于 2019-4-15 00:57:13 | 只看该作者
    7#

    1

    主题

    6

    帖子

    25

    积分

    新手上路

    Rank: 1

    积分
    25
    ?楼主| 发表于 2019-4-23 08:32:24 | 只看该作者
    8#

    方便加个联系方式吗

    9

    主题

    23

    帖子

    609

    积分

    高级会员

    Rank: 4

    积分
    609
    发表于 2019-5-18 12:50:07 | 只看该作者
    9#
    新手上路

    1

    主题

    6

    帖子

    25

    积分

    作者的其他帖子

    • 售后服务
    • 关注我们
    • 社区新手

    Powered by Discuz! X3.4??? 2001-2013 Comsenz Inc.